pH-Buffer 8.2 is a product especially developed to stabilise the pH value for all saltwater aquariums.
pH-Buffer 8.2 quickly, safely and permanently stabilises the pH value without affecting alkalinity (balance of bicarbonate, carbonate and hydroxide ions).
Use pH-Buffer 8.2 in combination with pH Increase to permanently increase and stabilise the pH value.
Dosage incl. dosage calculator
|
Your aquarium |
l
|
|
|---|---|---|
| Every 48 hours | 1x level measuring spoon per 100 L of water |
ml
|
Dosage:
Add one level dosage spoon to 100 litres of water every 48 houses until the pH value has stabilised.
Before adding the product to the aquarium, dissolve it in 250 ml of osmosis water. The optimum pH value is 8.0-8.4.
- If the pH values continue to be low, check the CO2 supply from your calcium reactor to rule out too much free CO2 in the water.
- Immediately reove rot in the form of dead organic matter.
- Use pH Increase in combination with pH-Buffer to permanently stabilise and increase the pH value.
- Check your water values regularly.
what do I need and when?
If the pH value in the aquarium is already close to the target value, e.g. at 6.3 (with a target value of 6.5), the corresponding buffer compensates for small deviations upwards and downwards. It then stabilises the value.
However, if the pH value in the aquarium differs too much from the target value, e.g. at 5.5 (with a target value of 6.5), it must first be increased or decreased using pH Increase or pH Decrease and then stabilised with the pH Buffer.
Safety data sheet - Buffer 8,2 pH
Instructions Saltwater Aquarium: The ideal start
